Ni 9074.Network IP Configuration for CompactRIO 9073 and 9074

 

Ni 9074

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Reported In.cRIO and NI behaviour and troubleshooting – NI Community

 

Dec 19,  · The cRIO is a legacy device and not compatible with XNET. You can use the cRIO with NI-CompactRIO and NI-Industrial Communications for EtherCAT software. 8-Slot, MHz CPU, MB DRAM, MB Storage, 2M Gate FPGA CompactRIO Controller (Legacy)—cRIO è un controller embedded ideale per applicazioni di controllo e monitoraggio.‑Questo controller robusto e fanless, dispone di un processore real-time, di un FPGA e di diverse opzioni di connettività, inclusa una porta Ethernet e una seriale. Nov 24,  · Beginning in April for cRIO controllers and January for cRIO controllers, new controllers will feature automatic network connection. The cRIO will attempt to establish a DHCP network connection when connected to .

 

Ni 9074.Using cRIO Controller with NI-XNET – National Instruments

Nov 24,  · Beginning in April for cRIO controllers and January for cRIO controllers, new controllers will feature automatic network connection. The cRIO will attempt to establish a DHCP network connection when connected to . 8-Slot, MHz CPU, MB DRAM, MB Storage, 2M Gate FPGA CompactRIO Controller (Legacy)—cRIO è un controller embedded ideale per applicazioni di controllo e monitoraggio.‑Questo controller robusto e fanless, dispone di un processore real-time, di un FPGA e di diverse opzioni di connettività, inclusa una porta Ethernet e una seriale. May 14,  · Hi there. I face the following problem and I need your help to troubleshoot. I have a unit running for over 5 years almost everyday which consists of a NI cRIO and two (2) NI EtherCAT modules. Both cRIO and EtherCATs are in FPGA mode (each one has a NI module for PWM functionality) So far so good, this setup is up and running without problems for ted Reading Time: 7 mins.
 
 
related:
Using cRIO 9074 Controller with NI-XNET
cRIO 9074 and NI 9144 behaviour and troubleshooting
Network IP Configuration for CompactRIO and – National Instruments

Environment
Apogee Duet – Professional Dual Channel FireWire Audio Interface

Apogee Electronics, a well-known manufacturer of professional studio equipment, has released an audio interface with the FireWire 400 bus, which is interesting primarily for its positioning in the mass sector. The novelty is designed for computers Apple Mac. Integrates with Apple Logic Pro, Soundtrack Pro, and GarageBand.

Duet has a 2×2 analog channel configuration. At the inputs, in addition to the line signal reception mode, microphone preamplifiers with a gain of 75 dB, as well as two guitar preamplifiers can be used. Output channels are duplicated at headphone output.

Specifications:

  • two input / output channels 24 bit 96 kHz;
  • two balanced XLR inputs, + 48V phantom power each;
  • two unbalanced high impedance instrument inputs;
  • one stereo headphone-out;
  • two linear unbalanced (-10 dBV) monitor outputs;
  • multifunctional control for volume, input level, MIDI control;
  • multi-segment LED indicator of input and output;
  • FireWire 400, Mac OS X Core Audio;
  • integration and control of Apple GarageBand, Logic Pro, Logic Express, Final Cut Studio (Soundtrack Pro);
  • compatibility with any Core Audio-application;
  • Apogee Maestro software for advanced controls and low latency mixing.

Duet is easy to use and is designed primarily for mobile recording, as indicated by its FireWire bus power. Multifunctional large knob can control input and output level. Duet can also control devices via MIDI using Apogee Maestro software.

Product is expected to be on sale in September 2021.
MSRP: $ 495.

Manufacturer’s website: http: // www.apogeedigital.com

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*